The solutions range of ready-mixed concretes has been specially developed for the civil engineering professional. There are eight mixes in the range, each with its own unique qualities and characteristics.
Whether you’re faced with difficult ground conditions, difficult applications or difficult access,
solutions has the answer.
NOTE: All the products in the solutions range must be handled, placed and cured properly to maximise performance. For best results, only trained concrete placers should be used.
Durafoam is a finely graded mortar, foamed to provide a low density material ideal for trench reinstatement, including void fill, insulation, cavity walls and non-structural applications. A lightweight material, it is produced by incorporating a pre-formed foam into a base mix of cement paste or mortar.
Fibrecrete is a polypropylene fibre-reinforced concrete which offers benefits in both the fresh and hardened state. When fresh, both bleed and plastic cracking are considerably reduced. The effect on early age tensile strength during hardening is also beneficial, and after hardening the fibres improve the toughness and general durability. One of its main applications is in pavement and floor slabs where crack control and durability are of particular importance.
Protect extends the life of structures and buildings by
protecting the reinforcement within the concrete with a special corrosion inhibitor. It uses the latest technology within the design to extend the life of structures and buildings. Using a special multifunctional corrosion inhibitor, the reinforcement within the concrete benefits from an adsorbed protective film which delays the corrosion process.
Easyfill is a highly air-entrained concrete developed for trench reinstatement and void fill applications in various environments. It’s a lightweight material produced by incorporating a powerful concentrated air entraining admixture into a base concrete or mortar.
Fast-track is a range of high early-strength concretes which speed up construction by allowing quick release of formwork. It can save time, energy and money by ensuring production deadlines can be met with confidence, reducing the requirement for external heating and reducing production time and increasing productivity.
Duraflow is a self-placing concrete that offers huge benefits and cost savings by allowing placement of concrete in difficult situations. It is easy and quick to place, needs no vibration, and moves effortlessly through intricate or congested reinforcement, with no bleeding or segregation. This can mean a substantial reduction of labour and equipment. The faster, unassisted placing brings lower site costs and reduced risk and exposure to noise and vibration.
Watertight is a specially designed concrete which includes a pore blocking agent and a powerful new generation superplasticiser to provide extremely low permeability. The product, which is backed by a British Board of Agrément certificate,
gives increased resistance to chemical attack and protection to the reinforcement and is also available in combination with Duraflow as a self-placing, watertight mix.
We can design specialist mixes for individual applications - please contact our technical team at
enquiries@hanson