Coursing Bricks are aerated blocks produced in standard brick sizes for use in bonding and infill. They ensure that a uniform thermal performance is achieved throughout the wall.
- Protect against pattern staining
- Infill above doors and windows
- Coursing at floor and ceiling level
- Making up between joists
- Hi-Strength Coursing Bricks are also available for use in walls built of Hi-Strength 7, or Hi- Strength 10 blocks
Working dimensions
Face dimensions (mm) 215 x 65
Thicknesses
| Thickness (mm) |
100 |
115 |
125 |
130 |
140 |
150 |
Note: Thermalite
® Coursing Bricks are suitable for use externally and internally, above or below dpc level in loadbearing or non-loadbearing applications.
Loadbearing walls should not be constructed with Thermalite
® Coursing Bricks as the sole masonry unit.
Additionally, standard Coursing Bricks should not be used in walls where the compressive strength requirement for the blockwork is in excess of 2.9N/mm².